SciELO - Scientific Electronic Library Online

 
vol.30 número1Procedure for the obtaining by means of MFE of the thermal fields, deformations and residual tensions in welded unions índice de autoresíndice de materiabúsqueda de artículos
Home Pagelista alfabética de revistas  

Servicios Personalizados

Revista

Articulo

Indicadores

Links relacionados

  • No hay articulos similaresSimilares en SciELO

Compartir


Revista Técnica de la Facultad de Ingeniería Universidad del Zulia

versión impresa ISSN 0254-0770

Resumen

ATZLER, F; LAWES, M; LEE, Y  y  MARQUEZ, N. Characterization of two-phase combustible mixtures produced in a fan stirred bomb. Rev. Téc. Ing. Univ. Zulia [online]. 2007, vol.30, n.1, pp.3-12. ISSN 0254-0770.

Abstract  The study of spray combustion is difficult due to the multiplicity of inter-dependent variables, such as pressure, temperature, droplet size, droplet size distribution, etc, especially industrial cases. Therefore, a combustion vessel developed to study the combustion of droplet clouds from a fundamental point of view has been chosen for the present work. However, it was required a full characterization of the aerosols produced before any combustion study could be undertaken. The distribution of droplets within the mixture, without combustion, was characterised using several laser diagnostics, variables such as Sauter mean diameter, number density, gas and liquid equivalence ratios were determined. Nearly mono-sized droplet clouds were obtained in this vessel and the droplet diameter was a well defined function of time

Palabras clave : Spray combustion; characterization.

        · resumen en Español     · texto en Inglés