SciELO - Scientific Electronic Library Online

 
vol.30 issueESPECIALThermal-chemical method assisted by microwave radiation for the dehydration of a heavy crude oilMechanical breaking of aqueous foams using static separators author indexsubject indexarticles search
Home Pagealphabetic serial listing  

Services on Demand

Journal

Article

Indicators

Related links

  • Have no similar articlesSimilars in SciELO

Share


Revista Técnica de la Facultad de Ingeniería Universidad del Zulia

Print version ISSN 0254-0770

Abstract

RENNOLA, Leonardo et al. Filtración de emulsiones crudo/agua con membranas poliméricas. Influencia de las interacciones interfaciales. Rev. Téc. Ing. Univ. Zulia [online]. 2007, vol.30, n.Especial, pp.410-418. ISSN 0254-0770.

In this work, membrane type, filtration pressure, concentration and nature of the crude oil were studied when emulsified crude oil was removed by membrane filtration methods. Interfacial interactions in the crude/water/membrane system were determined by means of interfacial tension and contact angle measurements. Diluted emulsions of Apure (33.4°API) crude oil were filtered over polysulphone and regenerated cellulose membranes and high removal of crude oil was found, with a higher efficiency of the polysulfone membrane. Nevertheless, the regenerated cellulose membrane had a higher permeate flux and better fouling resistance. Filtration done with emulsions made with Apure oil emulsions and with Lagocinco (32.7°API) oil emulsions showed that it is possible to remove 93.6% of Apure crude and 91.9% of Lagocinco crude oil. The permeate flux, fouling and crude removal are function of the interfase interaction between crude and the membrane surface.

Keywords : Crude oil emulsion; membrane filtration; interfacial interactions; contact angle; Emulsiones; filtración; membranas; ángulo de contacto.

        · abstract in Spanish     · text in Spanish