SciELO - Scientific Electronic Library Online

 
vol.39 issue1Distribution of the components between the phases obtained from blends of a styrene-butadiene star-copolymer and polystyrene or polybutadiene author indexsubject indexarticles search
Home Pagealphabetic serial listing  

Services on Demand

Journal

Article

Indicators

Related links

  • Have no similar articlesSimilars in SciELO

Share


Revista Técnica de la Facultad de Ingeniería Universidad del Zulia

Print version ISSN 0254-0770

Abstract

CONTRERAS, efferson et al. Adsorptive Capacity of Activated Carbon from Algarrobo as Fixed Bed for Nickel Adsorption. Rev. Téc. Ing. Univ. Zulia [online]. 2016, vol.39, n.1, pp.024-030. ISSN 0254-0770.

Adsorption column tests, using granular activated carbon CAA as fixed-bed at constant operating column parameters, were performed, including: fixed bed length, flow rate, nickel initial concentration in the influent solution, and changing the pH of the influent solution at 3.00, 4.50 and 6.00. The results showed that a pH value of 6.00, the evaluation parameters were much more successful than the rest of the pH of the solution studied. t b = 5.76 min, t s = 119 min, V ef = 170 mL, L ZTM = 8.19 cm, q eq = 2.36 mg×g -1 y un R T = 88.91 % values were obtained. The Yoon-Nelson model was applied to the experimental data to describe the behavior of the breakthrough curve, found that the values were adjusted successfully to model because the linear correlation obtained, with R 2 values greater than 0.96. Breakthrough curves, observed and calculated, showed the typical “S”-shape that characterizes them, with different points of inflection; reflecting more widened and steeper as the pH value in the influent solution was increasing.

Keywords : granular activated carbon; fixed bed; operations parameters; evaluation parameters; breakthrough.

        · abstract in Spanish     · text in Spanish