SciELO - Scientific Electronic Library Online

 
vol.27 número2Caracterización Estructural de distintas fracciones Aisladas del crudo extrapesado CaraboboEstudio de la influencia del par aniónico no3- - br- en la síntesis del sistema cancrinita - sodalita índice de autoresíndice de materiabúsqueda de artículos
Home Pagelista alfabética de revistas  

Servicios Personalizados

Revista

Articulo

Indicadores

Links relacionados

  • No hay articulos similaresSimilares en SciELO

Compartir


Revista Latinoamericana de Metalurgia y Materiales

versión impresa ISSN 0255-6952

Resumen

PRIETO GARCIA, Francisco et al. Síntesis y Caracterización de Ferritas de Manganeso por Vía Hidroquímica. Rev. LatinAm. Met. Mat. [online]. 2007, vol.27, n.2, pp.95-105. ISSN 0255-6952.

Ferrite formation can be used to remove Mn2+ ions from wastewater used in mineral processing. The deal of this work is to apply the hydrochemical process to promove the manganese ferrites formation in order to reduce the contamination level in aqueous medium. The results shown that it is possible to obtain purification efficiencies greater than 98%. The optimum operation conditions were: concentration of Mn2+ of 500 mg.L-1, temperature of 60°C, time 60 minutes, air flux of 50 L.min-1, stirring rate 530 rpm and molar ratio [ Fe2+]/[Mn2+] of 15. It is proposed the reaction mechanism: xMn2+ + 3FeSO4 + 6NaOH + ½ O2 ® MnxFe3-xO4 +3Na2SO4 + 3H2O +x[Fe2+ total].  It is presented the chemical composition and stoichiometric of the manganese ferrites obtained.

Palabras clave : Ferrites; Molars relations; Manganese; Heavy metal pollution.

        · resumen en Español     · texto en Español