SciELO - Scientific Electronic Library Online

 
vol.30 issue2Caracterización microestructural de las aleaciones base cobre Cu95Co5 Y Cu90Co5Ni5 obtenidas por aleado mecánico y sinterizaciónSíntesis y caracterización de matrices orgánicas e inorgánicas conteniendo pigmentos naturales author indexsubject indexarticles search
Home Pagealphabetic serial listing  

Services on Demand

Journal

Article

Indicators

Related links

  • Have no similar articlesSimilars in SciELO

Share


Revista Latinoamericana de Metalurgia y Materiales

Print version ISSN 0255-6952

Abstract

HERNANDEZ-ALVARADO, Laura A; HERNANDEZ, Luis S  and  TORRES, Gabriel. Aleaciones eutectoides Zinc-Aluminio + 2 - 6% de plata como ánodos de sacrificio. Rev. LatinAm. Metal. Mater. [online]. 2010, vol.30, n.2, pp.149-158. ISSN 0255-6952.

The electrochemical properties of ZnAlAg alloys were evaluated in order to use them as sacrificial anodes. In these alloys, the eutectoid proportion (Zn-22 wt % Al) was maintained; only different contents of 2, 4 and 6 wt % silver were added. These alloys exhibited excellent mechanical properties, among them, their superplastic behavior. The evaluated parameters were: current capacity, working potential evolution and dissolution morphology in a galvanostatic-controlled procedure; evolution of the cathodic and anodic polarized potentials and cathodic current density in a procedure without galvanostatic control. Although the values of several of the above mentioned parameters were satisfactory, the two procedures clearly showed that the ZnAlAg anodes passivated in artificial sea water. However, a homogenization treatment applied to the initial as-cast structures originated an appropriate performance of the galvanic anodes in a NaCl 0,5 M brine, without passivation and without the exfoliation showed in the as-cast structure.

Keywords : Zn - Al Alloys; Cathodic Protection; Sacrificial Anode; Anode Current Capacity.

        · abstract in Spanish     · text in Spanish