SciELO - Scientific Electronic Library Online

 
vol.30 número2Caracterización microestructural de las aleaciones base cobre Cu95Co5 Y Cu90Co5Ni5 obtenidas por aleado mecánico y sinterizaciónSíntesis y caracterización de matrices orgánicas e inorgánicas conteniendo pigmentos naturales índice de autoresíndice de materiabúsqueda de artículos
Home Pagelista alfabética de revistas  

Servicios Personalizados

Revista

Articulo

Indicadores

Links relacionados

  • No hay articulos similaresSimilares en SciELO

Compartir


Revista Latinoamericana de Metalurgia y Materiales

versión impresa ISSN 0255-6952

Resumen

HERNANDEZ-ALVARADO, Laura A; HERNANDEZ, Luis S  y  TORRES, Gabriel. Aleaciones eutectoides Zinc-Aluminio + 2 - 6% de plata como ánodos de sacrificio. Rev. LatinAm. Metal. Mater. [online]. 2010, vol.30, n.2, pp.149-158. ISSN 0255-6952.

The electrochemical properties of ZnAlAg alloys were evaluated in order to use them as sacrificial anodes. In these alloys, the eutectoid proportion (Zn-22 wt % Al) was maintained; only different contents of 2, 4 and 6 wt % silver were added. These alloys exhibited excellent mechanical properties, among them, their superplastic behavior. The evaluated parameters were: current capacity, working potential evolution and dissolution morphology in a galvanostatic-controlled procedure; evolution of the cathodic and anodic polarized potentials and cathodic current density in a procedure without galvanostatic control. Although the values of several of the above mentioned parameters were satisfactory, the two procedures clearly showed that the ZnAlAg anodes passivated in artificial sea water. However, a homogenization treatment applied to the initial as-cast structures originated an appropriate performance of the galvanic anodes in a NaCl 0,5 M brine, without passivation and without the exfoliation showed in the as-cast structure.

Palabras clave : Zn - Al Alloys; Cathodic Protection; Sacrificial Anode; Anode Current Capacity.

        · resumen en Español     · texto en Español