SciELO - Scientific Electronic Library Online

 
vol.32 número2Producción en laboratorio de acero dual phase laminado en caliente, para la fabricación de cilindros de gas licuadoDeposición y caracterización de un sistema de recubrimiento duplex aplicado sobre acero para trabajo en caliente AISI H13 índice de autoresíndice de assuntospesquisa de artigos
Home Pagelista alfabética de periódicos  

Serviços Personalizados

Journal

Artigo

Indicadores

Links relacionados

  • Não possue artigos similaresSimilares em SciELO

Compartilhar


Revista Latinoamericana de Metalurgia y Materiales

versão impressa ISSN 0255-6952

Resumo

APERADOR, Willian; AMAYA, Cesar  e  BAUTISTA RUIZ, Jorge. Evaluation of resistance to erosion corrosion of multilayer TiN/AlTiN. Rev. LatinAm. Metal. Mater. [online]. 2012, vol.32, n.2, pp.210-217. ISSN 0255-6952.

Thin films were deposited in multilayer TiN / AlTiN with periods of 2, 6, 12 and 24 bi-layers on AISI 1045 steel substrates, by RF magnetron sputtering system on Ti and Al targets (99.99%) in Ar/N2 atmosphere. The multi-layers were tested against to corrosion, erosion and corrosion erosion 90° angle impact and 0.5 M NaCl solution and silica, and analyzing the effect of number of bi-layers on the corrosion resistance of these coatings. The electrochemical characterization was performed by Tafel polarization curves and micro-structural by scanning electron microscopy. The study showed decreased rate corrosion on substrate, it diminished from 2291.05 mpy to 351.24 mpy with 2 bi-layers, and 15.01 mpy with 24 bi-layers. These results corroborate the good acting of the bi-layers in the corrosion erosion resistance. From the results of scanning electron microscopy can confirm the protective effect of coatings on the substrate as well as the increasing number of bi-layers.

Palavras-chave : aluminum titanium nitride; corrosion dynamics; erosion corrosion; erosion; scanning electron microscopy.

        · resumo em Espanhol     · texto em Espanhol