SciELO - Scientific Electronic Library Online

 
vol.34 número1OPTIMIZACIÓN DE SOLDADURA POR FRICCIÓN-AGITACIÓN DE LA ALEACIÓN DE ALUMINIO AA 6261-T5 MEDIANTE APLICACIÓN DE METODOLOGÍA DE SUPERFICIE DE RESPUESTAEVALUACIÓN DE LA RESISTENCIA A LA CORROSIÓN POR CO2 DE NUEVOS ACEROS DE BAJO CROMO UTILIZADOS EN TUBULARES DE POZO MEDIANTE TÉCNICAS ELECTROQUÍMICAS índice de autoresíndice de materiabúsqueda de artículos
Home Pagelista alfabética de revistas  

Servicios Personalizados

Revista

Articulo

Indicadores

Links relacionados

  • No hay articulos similaresSimilares en SciELO

Compartir


Revista Latinoamericana de Metalurgia y Materiales

versión impresa ISSN 0255-6952

Resumen

LINARES, Carlos F. et al. EFFECT OF CALCINATION TEMPERATURE ON NiMo/Zn-HYDROXYAPATITES CATALYSTS IN THE HYDRODESULFURATION REACTION OF THIOPHENE. Rev. LatinAm. Metal. Mater. [online]. 2014, vol.34, n.1, pp.66-75. ISSN 0255-6952.

Zn-hydroxyapatites supports were synthesized with a variable Zn content (0-15% mol Zn). Samples were dried at 80°C for 24 h before being impregnated with a Mo salt (as 15% MoO3) and a Ni salt (3 Mo: Ni atomic ratio). After impregnation, solids were divided in two portions: one portion was calcined at 400°C and, the other one at 800 °C respectively for 4 h. These samples were characterized by different techniques such as: X-ray diffraction (XRD), FT-IR spectroscopy, transmission electron microscopy (TEM), temperature programmed reduction (TPR) and BET surface area measurements. Results showed that calcination temperature, and the Zn content into the hydroxyapatite structure, play an important role on textural properties of these potential catalysts for hydrodesulfurization reaction of thiophene.

Palabras clave : Hydroxyapatites; calcination temperature; textural properties; hydrotreating; thiophene; hydrotreating..

        · resumen en Español     · texto en Español     · Español ( pdf )