SciELO - Scientific Electronic Library Online

 
vol.34 número1PRESSURE DEPENDENCE OF RAMAN-ACTIVE MODE FREQUENCIES IN SULVANITE Cu3NbS4 TERNARY COMPOUNDEFECTO DE LA INSERCIÓN DE CERIO EN LAS PROPIEDADES ESTRUCTURALES, ELECTROQUÍMICAS Y ÓPTICAS DE PELÍCULAS DELGADAS MoO3 índice de autoresíndice de materiabúsqueda de artículos
Home Pagelista alfabética de revistas  

Servicios Personalizados

Revista

Articulo

Indicadores

Links relacionados

  • No hay articulos similaresSimilares en SciELO

Compartir


Revista Latinoamericana de Metalurgia y Materiales

versión impresa ISSN 0255-6952

Resumen

ANTONINI, Leonardo M. et al. STUDY OF THE EFFECT OF THE CURRENT IN THE PROCESS IN THE OBTAINING NANOSTRUCTURED SURFACE OF TITANIUM. Rev. LatinAm. Metal. Mater. [online]. 2014, vol.34, n.1, pp.92-100. ISSN 0255-6952.

Titanium and its alloys have been widely used in implants and prostheses. However, the clinical success of these biomaterials can be compromised due to failures that can occurs by loss cohesion of tissue, fracture or allergic reactions caused by the presence of dissolved metallic ions or detached solid particles by mechanical factors. Some results presented on the literature have been showed that the surface roughness of the titanium implants affects the osseointegration rate and biomechanical fixation. The present work aims to study the current density effect on the electrochemical treatment of Ti to obtain nanostructured surfaces. The samples were mechanically sanded and electrochemical treatment on acid solution. After the electrochemical treatment the samples were characterized by atomic force microscopy, profilometry and wettability tests. Preliminary results showed that is possible to control the morphology of nanostructured surfaces by electrochemical treatment parameters control.

Palabras clave : Titanium; Electrochemical Treatment; Biomaterials; Nanostructured Surfaces..

        · resumen en Portugués     · texto en Portugués     · Portugués ( pdf )