SciELO - Scientific Electronic Library Online

 
vol.35 número1Obtención de concretos autocompactantes empleando residuos de demoliciónDatos de difracción de rayos-X y refinamiento rietveld de los semiconductores calcogenuros ternarios AgInSe2 y AgInTe2 índice de autoresíndice de assuntospesquisa de artigos
Home Pagelista alfabética de periódicos  

Serviços Personalizados

Journal

Artigo

Indicadores

Links relacionados

  • Não possue artigos similaresSimilares em SciELO

Compartilhar


Revista Latinoamericana de Metalurgia y Materiales

versão impressa ISSN 0255-6952

Resumo

GANDO, Ivonne et al. Factors controlling the distribution of organically modified clays between polybutadiene-rich and polystyrene-rich phases in the synthesis of high impact polystyrene. Rev. LatinAm. Metal. Mater. [online]. 2015, vol.35, n.1, pp.95-109. ISSN 0255-6952.

This work investigates the effect of kinetic factors and the surface chemistry of the particles on the dispersion and distribution of clays in heterogeneous system containing polystyrene (PS) and polybutadiene (PB). It was carried out in 2 stages. In the first stage, an isothermal system without copolymer was investigated; that involved simple blends of the mentioned homopolymers, of commerciallymodified clays, and of styrene (St) as solvent. In these soft blends, phase demixing was not spontaneous observed, but was induced by centrifugation. After demixing, the composition of the isolated phases was determined by calcination/infrared spectroscopy (FTIR); and in some phases, the clay dispersion was analyzed by X-ray diffraction (XRD). In the second stage, in situ and nitroxide-mediated polymerizations of the St-containing blends were carried out. The incorporation of the organo-clay particles into the different phases and morphology of the rubbery particles of the resulting high-impact polystyrenes (HIPS’s), were observed by transmission electronic microscopy, TEM. The distribution of silicates between the phases was analyzed by calcination/FTIR. In all the samples (i.e., in those of simple blends and in those with polymerization), the clay was mainly incorporated into the PB-rich phase, due to the high affinity between PB and the clay modifiers. In the case of the soft blends, demixing was prevented by the increased stability introduced by the clay; and several mechanisms were proposed to explain such behavior. In the case of the synthesized HIPS’s, their thermal resistances were increased by the presence of the modified clays and by increasing the degree of dispersion of the clay in the polymer.

Palavras-chave : nanocomposites; HIPS; clay partition.

        · resumo em Espanhol     · texto em Espanhol     · Espanhol ( pdf )