SciELO - Scientific Electronic Library Online

 
vol.22 número3Calibración del separador magnético de alta intensidad magnet-lift mlh (13) 111-5 para su uso en el laboratorio de termocronología de la UCV índice de autoresíndice de materiabúsqueda de artículos
Home Pagelista alfabética de revistas  

Servicios Personalizados

Revista

Articulo

Indicadores

Links relacionados

  • No hay articulos similaresSimilares en SciELO

Compartir


Revista de la Facultad de Ingeniería Universidad Central de Venezuela

versión impresa ISSN 0798-4065

Resumen

ZAREA, STEFAN  y  MARVAL, JUAN PEDRO. Perfiles de velocidad alrededor de un ventilador centrifugo de confortVelocity profiles around of the comfort centrifugal fan. Rev. Fac. Ing. UCV [online]. 2007, vol.22, n.3, pp.85-96. ISSN 0798-4065.

The components of air flow velocity in inlet and outlet of a centrifugal fan without volute were measured with a hot wire anemometer, in controlled conditions. The centrifugal fan, provided with grill and pedestal, was placed in an isolated space of exterior air draught. The measures of axial, radial and tangential velocities were made on a horizontal plane that cut the fan symmetrically by the shaft. The results are shown in 13 graphs, in two forms: Dimensionless Velocity Curves in function of dimensionless distance with regard to the fan and isovelocity curves. The axial velocity profile on the suction is approximately symmetrical with regard to the axis of the fan. The radial and tangential velocities were of same order of magnitude. The parameters that characterize the cuasi-radial jet discharge and the suction flow were calculated.

Palabras clave : Velocity profile; Vortex flow; Centrifugal fan; Anemometer; Hot wire.

        · resumen en Español     · texto en Inglés