SciELO - Scientific Electronic Library Online

 
vol.23 número3Transporte de sólidos en mezclas de biopolímeros en solución y mejoras en la distribución de sólidos de un sistema experimental de simulación de flujo en conductos verticales de sección anularAspectos de gestión empresarial que condicionan el desempeño ambiental de la agroindustria de alimentos venezolana índice de autoresíndice de materiabúsqueda de artículos
Home Pagelista alfabética de revistas  

Servicios Personalizados

Revista

Articulo

Indicadores

Links relacionados

  • No hay articulos similaresSimilares en SciELO

Compartir


Revista de la Facultad de Ingeniería Universidad Central de Venezuela

versión impresa ISSN 0798-4065

Resumen

DI SCIPIO, SABRINA; ESCALONA, YESSICA; QUIJADA, KARINA  y  MILLAN, FÉLIX. Study of the mixing of concentrated oil in water emulsions applying the surface response methodology. Rev. Fac. Ing. UCV [online]. 2008, vol.23, n.3, pp.53-64. ISSN 0798-4065.

In the Food Industry, highly-concentrated disperse phase emulsions (> 75%) are frequently produced, considering physicochemical and compositional parameters, and the mixing conditions. Most of the research related to the mixing of disperse systems has studied diluted systems without surfactants. The present work deals with the preparation of highly-concentrated corn oil in water emulsions with ethoxylated non ionic surfactant. The experimental method was based on factorial design 23 with central and axial points, where impeller rotational speed, time agitation and, oil: water ratio were varied. The influence of those variables on volume and surface area mean drop diameter of emulsions, d43 and d32, respectively, was evaluated. Through the analysis of variance of experimental space, eliminating the non-significant effects, it was determined that d43 can be predicted almost by 99% by a quadratic model, but this model, by itself, can not explain the d32 whole extension response surface, because the lack of fit is considerable; however the quadratic model can be used to analyze the influence of the variables. A cubic fit was developed for the d32, this model presented confused terms that do not permit the determination of a final relationship between pure and crossed variables, but allows the exploration of the complete d surface response, because it represents better the experimental variability without lack of fit. The model’s assumptions normality, independence, and homocedasticity were satisfied.

Palabras clave : Emulsion; Sauter diameter (d32); Volume mean diameter (d43); Response surface methodology.

        · resumen en Español     · texto en Español