| | Table of contents
Rev. LatinAm. Metal. Mater. vol.33 no.1 Caracas June 2013  Press Release | | | | |
| Editorial | | | | | | | | | | | Contribuciones Invitadas | | | | | | · Hyperbranched and hiperfunctionalized materials from dendritic chemistry
Calderón, Marcelo; Strumia, Miriam
| | | | | Artículos Regulares | | | | | | · X-Ray diffraction peak analysis of two metallic materials
Aguilar, Claudio; Guzman, Danny; Iglesias, Carlos
| | | | | | · Physical and chemical characterization of fiber and pulp of Bambusa vulgaris Schrad for use in polymeric composites
Junior, Mario Guimarães; Novack, Kátia Monteiro; Botaro, Vagner Roberto; Protásio, Thiago de Paula; Couto, Allan Motta
| | | | | | · Synthesis nano-Au supported in oxides metallic and catalytic activity in oxidation reaction of CO
Díaz, Juan C; Fontal, Bernardo; Combita, Diego; Martínez, Cristina; Corma, Avelino
| | | | | | · Comparative study of the physico-mechanical properties of composites with carbon nanofibres (CNF) and multiwall carbon nanotube (MWCNT) in a polyether sulfone (PES) matrix
Ramón, Bladimir; Hernadez, Natalia; Sarasua, José Ramón
| | | | | | · Production and corrosion resistance of niobium nitride-niobium multilayers
Olaya F, Jhon J; Hernández M, Wilson
| | | | | | · Estimation of energy distribution in mechanical alloying of the systems Cu-3Wt.%Cr and Cu-3Wt.%Mo
Aguilar, Claudio; Guzman, Danny; Ordoñez, Stella; Rojas, Paula A
| | | | | | · Preparation and physical-chemical and mechanical characterization of ternary blends of polylactide (PLLA), polycaprolactone (PCL) and thermoplastic starch (TPS)
Mina, Jose H; Valadez-González, Alex; Herrera-Franco, Pedro; Zuluaga, Fabio; Delvasto, Silvio
| | | | | | · Influence of deposition parameters on the porosity and adherence of coatings sprayed by combustion flame from 31SiO2-11P2O5-51-CaO-7MgO bioglasses
Correa, Raúl; Monsalve, Mónica; López, Esperanza; Bolívar, Francisco; Vargas, Fabio; Ríos, Tatiana; Muñoz, Andrea
| | | | | | · Obtaining of tin oxide in the system SnCl2-H2O: Mechanism of formation of particles
Aguilar, Carol J; Ochoa, Yasser H; Rodríguez-Páez, Jorge E
| | | | | | · Effect of temperature on the crystalline structure of K0.5Na0.5NbO3 ceramics powder obtained by combustion reaction synthesis
Anacona, Oscar R; Garcia, Ducinei; Kiminami, Ruth H.G.A; Raigoza, Claudia F.V
| | | | | | · Production and characterization of zirconium oxide coatings by spray pyrolysis
Cubillos, Ivonne; Olaya, Jhon Jairo; Bethencourt, Manuel; Cifredo, Gustavo; Marco, Jose Francisco
| | | | | | · Influence of basicity and chromate-bromide anionic composition in the synthesis of the cancrinite-sodalite system
Ocanto, Freddy; Florenzano, Elizabeth; Linares, Carlos F
| | | | | | · Experimental study of corrosion resistance of AISI-SAE 1020 carbon steel implanted by titanium ions
Niño, Ely Dannier V; Peña B, Darío Y; Reyes C, Martha S; Dugar-Zhabon, Valeriy
| | | | | | · Characterization of low-alloy steels by means of different techniques
González, Juan Carlos; Luiggi, Ney
| | | | | | · Synthesis, characterization and magnetic properties of CoFe2O4 nanoparticles using PEG as surfactant
Briceño, Sarah; Brämer-Escamilla, Werner; Silva, Pedro; Delgado, Gerzon E; Diaz, Yraida; Plaza, Eric; Cañizales, Edgard
| | | |
|
pdf