| | Table of contents
Rev. LatinAm. Metal. Mater. vol.35 no.1 Caracas June 2015  Press Release | | | | |
| Editorial | | | | | | | | | | | Artículos Regulares | | | | | | · Challenges to the implementation of high temperature and strain instrumentation for in situ testing in the scanning electron microscope
Torres, Edwar A; Montoro, Fabiano; Unfried, Jimy S; Ramirez, Antonio J
| | | | | | · Biological and mechanics characterization of micrometric and nanometric α-alumina like potential material for bone tissue reconstruction
Villegas, Paola; Ramírez, Valentina; Taylor, Viviana; Arango, Sandra
| | | | | | · Modification of multi-wall carbon nanotubes (MWNTC's) using acetic acid and aniline by ultrasonic radiation
Cabello, Christian J; Sáenz, Aidé; Pérez, Catalina; López, Lluvia; Barajas, Leticia; Cantú Sifuentes, Liliana; Ávila, Carlos
| | | | | | · Crystal structure of the ternary semiconductor Cu2GeSe4
Delgado, Gerzon E; Contreras, Jines E; Marcano, Gustavo; Rincón, Carlos; Nieves, Luis
| | | | | | · Towards spider silk mimicry using polyurethanes with short segments of rigid and semiflexible units
Fernández-dArlas, Borja; González, Iker; Eceiza, Arantxa
| | | | | | · Effect of heat treatment on the structural and magnetic properties of the system Fe56.25Al43.75 prepared by mechanical alloying
Trujillo Hernandez, Juan S; Tabares, Jesus A; Pérez Alcázar, German A
| | | | | | · Residual stresses generated during hardening of medium carbon steel bar, finite element simulation and experimental verification
Ariza, Edwan A; Martorano, Marcelo A; Tschiptschin, André P
| | | | | | · Study of venezuelan garnierites modified with ammonium hydroxide as support of hydrodesulfurization catalysts
Linares, Carlos F; Acuña, Gabriela; Pérez, Freyder; Ocanto, Freddy; Corao, Carolina; Martínez, Susana; Betancourt, Paulino; Brito, Joaquín L
| | | | | | · Electrical characterization and electrogenic cell stimulation using a conductive polymer composite based on PEDOT:PSS/PVA/EG
Suárez-Vargas, José; Calderón, Marbely; Brämer-Escamilla, Werner; Briceño, Sarah; Sánchez, Iván; Bolaño, Pura; Caputo, Carlo
| | | | | | · Preparation of nanocomposites metal-polymer: Fe/PCL
Lárez, Joszaira; Rojas, Carlos; Cortina, Luis; Hernández, María Cristina
| | | | | | · Obtaining self-compacting concrete using demolition waste
Silva, Yimmy; Robayo, Rafael; Mattey, Pedro; Delvasto, Silvio
| | | | | | · Factors controlling the distribution of organically modified clays between polybutadiene-rich and polystyrene-rich phases in the synthesis of high impact polystyrene
Gando, Ivonne; Royet, José; Yañez, Miriam; González, Ida; Inciarte, Helen; Oliva, Haydée
| | | | | | · X-ray powder diffraction data and rietveld refinement of the ternary semiconductor chalcogenides AgInSe2 and AgInTe2
Delgado, Gerzon E; Mora, Asiloé J; Pineda, Carlos; Ávila-Godoy, Rosario; Paredes-Dugarte, Solange
| | | | | | · Microstructural characterization of low carbon steels by atomic force microscopy
Santos, Tiago F. A; Torres, Edwar A; Vilela, José M.C; Andrade, Margareth S; Cota, André B
| | | | | | · Wear and corrosion resistance of DLC coatings deposited on AISI 304 and AISI 1020 steels
Capote, Gil; Mastrapa, Gil C; Olaya, Jhon J
| | | |
|
pdf